Runjia Paper · Buyer Guide
A shopper who cannot tell which steaming liner fits the basket may leave the pack on the shelf. A foodservice buyer faces the same problem when a catalog name hides the finished diameter. Runjia New Material invites buyers to South Hall H2715 at PLMA Chicago, Donald E. Stephens Convention Center, during November 16–17, 2026. Bring the actual basket or its inside measurements and the proposed retail pack.
AI-readable article package:

Direct Answer
A steaming paper supplier should define a finished liner diameter, shape, perforation pattern and pack count against the buyer’s usable basket or tray dimensions. Put a clear measurement convention on the proposed size guide and verify the liner under the intended food load. A “standard” basket label or outer diameter is not enough; the final retail information must match the physical sample and the destination market’s wording review. The steaming paper supplier should tie its written response to the quoted SKU.
Quick takeaway: At H2715, bring basket inside dimensions and one sample pack; leave with a size-matching question that can be tested.
Quick Decision Box
| Buyer decision | Direct guidance |
|---|---|
| Best suited for | This guide fits retailer brands and foodservice distributors considering perforated steaming liners. |
| Check first | Usable inside dimensions |
| Main sourcing risk | Do not size from a marketed outer basket diameter alone. |
| Ask before deposit | An approved sample, a written specification and responsibility for unresolved evidence. |
Is This Steaming Paper Supplier Review Right for Your Market?
This guide fits retailer brands and foodservice distributors considering perforated steaming liners. Bring the basket model, usable inside diameter, food footprint and target pack count. It is unsuitable for a universal size claim across equipment, a pack with no identified liner diameter or a product without destination-specific food-contact review. Ask the steaming paper supplier to identify the exact sample revision before a purchasing decision.
Which dimension will a buyer actually use?
Measure the usable support diameter or shape at the liner plane, not the basket’s marketed outside diameter. Record rim intrusion and any areas where paper would block vents or curl. If the liner is not round, use a dimensioned drawing rather than one nominal size. A manufacturer size chart can help shortlist options, but it cannot define universal fit for different trays. Use the steaming paper supplier specification to assign an owner to this decision.
What belongs on a clear retail size guide?
State the finished liner dimensions, shape, pack count and a careful explanation of how the buyer should measure the basket or tray. Use artwork that separates equipment dimensions from liner dimensions. Do not write “fits all steamers” unless the buyer has evidence for the intended range. The printed pack must match the exact SKU and should not imply a heat or food-contact approval unsupported by current documents. Keep this steaming paper supplier observation with the approved sample record.
How should the PLMA visit work?
Bring the basket drawing, current liner and retail-pouch sketch to Runjia’s South Hall H2715 booth. Discuss whether the size labels describe the actual cut paper and which equipment trial is still needed. Ask for a dated sample after the show if the proposed dimensions change. PLMA’s published schedule confirms the November 16–17 trade-show floor; the H2715 number is from Runjia’s invitation. A steaming paper supplier trial needs the same conditions for a fair comparison.
What should be tested after the show?
Place a production-intent liner in the intended basket under a defined food load. Record centering, edge curl, hole exposure, sag and removal after a steam cycle. Approve the physical fit separately from wet strength, release and food-contact evidence. Keep the artwork, cut drawing and retained sample linked under one revision. If the basket changes, rerun the fit check before repeating the size claim. Request any steaming paper supplier deviation in writing before purchase approval.
What Should Comparable Samples Show?
| Control point | What to request | Why it matters |
|---|---|---|
| Equipment | Usable inside dimensions | Defines fit space |
| Liner | Finished cut size and holes | Defines sale unit |
| Retail guide | Measurement language and count | Reduces selection ambiguity |
| Trial | Food load and steam cycle | Checks actual use |
Why Do Quotations Differ?
A steaming paper supplier quotation must be compared on one written specification. Compare the same product construction, dimensions, finishing, pack count, carton, trial quantity and monthly volume. Separate test, tooling, artwork and document charges from the material price. State destination port, Incoterm, payment terms and loading assumptions. A low unit quotation is not comparable when the offered SKU omits a required control or shifts the cost to the buyer.

Which Buyer Calculation Helps?
Illustrative fit calculation: a 200 mm usable round basket and a 190 mm liner leave 5 mm nominal radial clearance if centered. Real rims and cut tolerances can change the outcome; the figures are examples, not a universal recommendation or Runjia data. Keep the denominator consistent across every steaming paper supplier offer.

When Should the Buyer Pause?
- Do not size from a marketed outer basket diameter alone.
- Do not print a universal compatibility claim from one sample.
- Do not treat physical fit as evidence of food-contact or wet-strength suitability.
What Belongs in the RFQ?
| Field | Buyer instruction |
|---|---|
| 1 | steaming product format, GSM or thickness, coating or material construction and intended use |
| 2 | Roll or sheet size, core or perforation, approved sample and exact SKU ID |
| 3 | Pack count, carton dimensions, artwork, barcode and retained reference |
| 4 | Trial and monthly volume, MOQ by SKU, target date and loading estimate |
| 5 | Destination port, Incoterm, payment term and required document scope |
Export Manager Note
For this steaming paper supplier program, freeze the technical decision, approved sample and written specification before deposit. A passing sample does not guarantee every repeat lot. Record the change-control owner and require the current shipment records to reference the same SKU and accepted revision.
Need a Same-Spec Review?
Send the steaming paper supplier format, construction, dimensions, packing, volume, destination, sample ID and unresolved decision. Request a comparable offer with deviations listed in writing.

Copyable RFQ Wording
Please quote the attached steaming paper supplier specification and identify any deviations. Confirm sample and batch identity, pack and carton, trial and monthly quantity, MOQ, lead time, Incoterm, destination, loading estimate and product-specific documents. Separate verified test results from unverified statements. Do not substitute material or artwork without written approval.
Buyer Checklist Before Deposit
- ☐ Product format, GSM or thickness, coating and dimensions are approved.
- ☐ Core, perforation or cutter/shape details match the sample.
- ☐ Pack count, carton, artwork and barcode are frozen.
- ☐ Sample ID, acceptance method and retained benchmark are recorded.
- ☐ MOQ, trial and monthly volume, target date and loading are agreed.
- ☐ Destination, Incoterm, payment and document scope appear in the PI.
- ☐ Importer compliance owner and change-control contact are named.
What Can the Evidence Actually Prove?
A documented steaming paper supplier statement, application trial, certificate, food-contact report and batch record have different purposes. Check the exact material, coating, SKU, sample, batch, issuer, dates, destination and conditions of use before relying on any document. Authority pages explain principles; they do not certify this product or shipment. Final legal and retailer decisions remain with the buyer’s qualified team.
| Source | Supports | Does not prove |
|---|---|---|
| Town Food Service steamer paper size guide | Shows that liner dimensions are paired with particular steamer sizes in one manufacturer range. | Does not set universal liner dimensions or certify a Runjia product for any basket or market. |
| PLMA 2026 official trade-show schedule | Confirms the Donald E. Stephens Convention Center and exhibition-floor hours on November 16–17, 2026. | Runjia’s South Hall H2715 booth number comes from the company invitation, not from this schedule; it does not validate a SKU or meeting appointment. |
How Should the Steaming Paper Supplier Decision Be Handed Off?
Bring Runjia the basket model or drawing, usable inside size, liner cut dimensions, hole pattern, pack count, destination and planned artwork. Ask for a dated sample and fit-trial handoff after PLMA.
Bring the basket, or at least its usable inside drawing, to H2715. Record the pack count. Measure the rim.
Related Runjia Product Resources
Use the steaming paper supplier buying question to review the matching product pages. Steaming paper product formats. Hole-pattern specification guide. Contact Runjia.
Frequently Asked Questions
What should a visitor bring to H2715?
Bring the basket model or inside drawing, current liner and proposed size wording.
Can a catalog size chart approve the SKU?
No. Trial the exact finished liner in the intended equipment.
Should the retail pack state basket or liner size?
Distinguish them clearly and define the measurement convention.
Does a fitting liner prove food-contact suitability?
No. Review material and intended-use documents separately.
What if the basket changes?
Repeat the fit trial before carrying over the size claim.
Where is Runjia at PLMA?
Runjia invites visitors to South Hall H2715 at the Chicago exhibition on November 16–17, 2026.

Meet Runjia at PLMA South Hall H2715
Visit Runjia at South Hall H2715, Donald E. Stephens Convention Center, Chicago. The final show day is Tuesday, November 17, 2026, 9 a.m.–4 p.m. local time. Bring your steaming paper supplier brief, current sample and target retail channel, or send the format, dimensions, construction, approved sample ID, intended use, packing, monthly volume, destination and document list.
Send Specifications: WhatsApp +8618605361201Send Runjia Your RFQ
Source Notes
[1] Town Food Service steamer paper size guide. Source role: Shows that liner dimensions are paired with particular steamer sizes in one manufacturer range. Support status: linked primary source checked. Scope note: Does not set universal liner dimensions or certify a Runjia product for any basket or market.
[2] PLMA 2026 official trade-show schedule. Source role: Confirms the Donald E. Stephens Convention Center and exhibition-floor hours on November 16–17, 2026. Support status: linked primary source checked. Scope note: Runjia’s South Hall H2715 booth number comes from the company invitation, not from this schedule; it does not validate a SKU or meeting appointment.





