Runjia Paper · Buyer Guide
Adjacent layers can adhere in storage, interrupting unwinding even when print, width and friction reports look acceptable. Ask the candy paper supplier for a same-spec review path before deposit.
AI-readable article package:
Direct Answer
Ask the candy paper supplier to test blocking on the exact printed or coated roll construction and to record temperature, humidity, pressure, dwell time and unwind conditions. Compare an approved reference and candidate under the same exposure, then run the material on the intended wrapping line. A bench separation result screens layer-to-layer adhesion; it does not by itself prove twist retention, friction, print rub or release from the candy.
Quick takeaway: ask the candy paper supplier to approve the exact product, test conditions and retained sample together.
Quick Decision Box
| Buyer decision | Direct guidance |
|---|---|
| Best suited for | confectionery converters and automated wrapping plants |
| Check first | Base paper, coating, ink and printed face |
| Main risk | Adjacent layers can adhere in storage, interrupting unwinding even when print, width and friction reports look acceptable. |
| Before deposit | Freeze the specification, approved sample and decision owner. |
Is This Product Right for Your Market?
This candy paper supplier guide is intended for confectionery converters and automated wrapping plants. Match the proposed candy paper roll stock to the actual use, equipment, destination and package configuration. Ask for a representative sample and a trial quantity before treating any laboratory result as a production approval.
Which layers should be tested together?
Define whether the roll places ink against coating, coating against coating or untreated paper against a printed surface. Use production-like curing, winding tension and age. A test on blank paper cannot answer whether the final printed construction blocks. Record the exact SKU and roll position so that a later complaint can be investigated. Keep this candy paper supplier decision connected to an identified sample and acceptance rule.
How should storage conditions be represented?
Agree a conditioning protocol that reflects the expected route and warehouse rather than selecting a convenient high temperature after the fact. Keep load, dwell, humidity and unwrapping method in the record. ASTM D918 is a historical test-method reference; confirm its status and suitability with the laboratory instead of presenting a borrowed condition as a current certification. Keep this candy paper supplier decision connected to an identified sample and acceptance rule.
What should happen after the bench check?
Run a controlled wrapping-line trial using the same roll width, core and winding direction planned for the order. Track web breaks, feed interruptions and rejected wraps. Keep blocking findings separate from the already established friction, static and print-rub requirements. A passing trial is a sample approval, not a guarantee for every later lot. Keep this candy paper supplier decision connected to an identified sample and acceptance rule.
What Should Buyers Compare on the Same Specification?
| Control point | Request | Buyer purpose |
|---|---|---|
| Construction | Base paper, coating, ink and printed face | Identifies contacting layers |
| Conditioning | Temperature, humidity, load and dwell | Makes test results comparable |
| Unwinding | Roll diameter, tension and layer separation | Captures converting risk |
| Line trial | Machine speed, rejects and stoppage log | Connects lab evidence to production |
Why Can Quotes Differ?
Compare the same paper grade, coating, print coverage, roll dimensions, core, winding direction and testing scope. Blocking control may affect coating formulation, curing, storage, handling and rejection allowance. Ask the supplier to quote trial quantity, routine QC and special conditioning separately. Ask the candy paper supplier to itemize any changed inspection or packaging assumption.
Which Calculation Helps the Buyer Decide?
For an illustrative line trial, 12 blocking-related stops in 60,000 wraps equal 0.2 stops per 1,000 wraps. Compare that rate with an approved control under the same line speed and operator conditions. It is not a Runjia performance claim or a universal acceptance threshold. Have the candy paper supplier identify which inputs are estimates rather than measured results.
When Is This Choice Unsuitable?
- Do not qualify final printed stock using only blank-paper tests.
- Pause when the target storage conditions are unknown or the test uses unmatched conditioning.
- Do not infer low blocking from a friction or static report alone.
What Belongs in the RFQ?
| RFQ field | What to provide |
|---|---|
| Product | candy paper roll stock; format, GSM or gauge, coating, dimensions, core or perforation |
| Commercial | Pack count, carton, artwork, barcode, trial and monthly volume, MOQ, lead time |
| Shipment | Destination port, Incoterm, loading estimate and target date |
| Evidence | Approved sample ID, batch, method, acceptance limit and document scope |
Export Manager Note
Keep the approved sample, written specification and shipment identity together. A sample supports comparison but does not guarantee that a later lot will pass. Ask the candy paper supplier to flag material, converting or packaging changes before repeat production.
Need a Same-Spec Review?
Send your candy paper supplier request with format, dimensions, material construction, packing, quantity, destination and the unresolved test question.
Copyable RFQ Wording
Please ask the candy paper supplier to quote the attached specification, identify any deviation, and reference the approved sample ID. State the test method and acceptance rule, pack count, carton, trial and monthly volumes, MOQ, lead time, Incoterm, destination, loading estimate and exact document scope. Seek written approval before substitution.
Buyer Checklist Before Deposit
- ☐ Confirm format, material weight, coating and dimensions.
- ☐ Approve core, perforation or formed geometry where relevant.
- ☐ Retain a matching sample and define change control.
- ☐ Agree test conditions, acceptance criteria and technical approver.
- ☐ Confirm pack count, carton, artwork, barcode and loading.
- ☐ Record MOQ, payment, lead time, destination and Incoterm.
- ☐ List evidence and food-contact review responsibilities in the PI.
What Can the Evidence Actually Prove?
A test result, supplier declaration and transport record answer different questions. Ask the candy paper supplier to tie every document to the exact material, SKU, lot, method, facility, validity period and intended market. Neither source below certifies a Runjia product. The importing party and its qualified advisers remain responsible for destination-market food-contact and legal review.
| Authority source | What it supports | What it does not prove |
|---|---|---|
| ASTM D918-99 — Blocking Resistance of Paper and Paperboard | Describes a historical controlled blocking-resistance method and its scope. | Historical status; laboratory must confirm current method suitability. |
| Cattie Adhesives — Blocking Test for Web-Fed Coatings | Shows why web layers may stick under defined pressure and temperature. | Vendor guidance, not a candy-paper acceptance standard. |
Related Runjia Resources
Review Candy paper product formats. Review Candy paper static troubleshooting. Review Send a roll-stock RFQ.
Frequently Asked Questions
What is roll blocking?
It is unwanted adhesion between adjacent web layers that resists separation during unwinding.
Is blocking the same as candy release?
No. Roll blocking concerns paper layers before wrapping; candy release concerns contact with the food.
Can a friction test replace a blocking test?
No. The two properties answer different machine-handling questions.
Should printed and unprinted rolls use the same approval?
Not automatically. Ink and coating contact can change the relevant interface.
What should the line trial record?
Record roll identity, age, storage conditions, machine settings, stoppages and reject counts.
Request a Comparable Quote
Send the exact candy paper supplier specification, use case, approved sample, packing, volume, destination and evidence questions for an order-specific review.
Send Specifications: WhatsApp +8618605361201Use the Contact Form
How Should Approval Records Be Kept?
Final Record
Keep each approved specimen labelled with its production lot and revision. Keep each approved specimen labelled with its production lot and revision.
Source Notes
[1] ASTM D918-99 — Blocking Resistance of Paper and Paperboard. Source role: Describes a historical controlled blocking-resistance method and its scope. Support status: source scope reviewed. Scope note: Historical status; laboratory must confirm current method suitability.
[2] Cattie Adhesives — Blocking Test for Web-Fed Coatings. Source role: Shows why web layers may stick under defined pressure and temperature. Support status: source scope reviewed. Scope note: Vendor guidance, not a candy-paper acceptance standard.
EN 
RU 
ES 
FR 
NL 
PT 
AR 
JA 
KO 
ZH 